All Voice of China 3D Printing

标题: 3Dprinting-Standard Resin [打印本页]
作者: Titan    时间: 2024-8-12 14:27
标题: 3Dprinting-Standard Resin
本帖最后由 Titan 于 2024-8-12 15:13 编辑


Standard Resin
(, 下载次数: 6)


Performance

1.High Precision and Sharpness

(, 下载次数: 5)

2.Low Shrinkage

(, 下载次数: 8)


3.High Hardness

(, 下载次数: 5)



4.Low Viscosity and Odor

(, 下载次数: 4)


5.Good Fluidity

(, 下载次数: 7)


6.Cost Effectiveness

(, 下载次数: 6)


7.No Cracking or Deformation


Color
White/Grey/ Red Wax Like/Skin Beige
Temperature
25±5 ℃
Humidity
40-60 %rh
Post Cure Time
5 mins
Wavelength
365-405(NM)
Bottom Curing Time
40-60(S)
Curing Time
2.5-3.5(S)
Shore Hardness
82-86(D)
Viscosity
100-150(CPS)
Density
1.1(g/c㎥)
Bending Strength
72-80(MPA)
Tensile Strength
40-50(MPA)
Elongation at Break
4-9(%)






欢迎光临 All Voice of China 3D Printing (https://panda3dp.com/) Powered by Discuz! X3.5