All Voice of China 3D Printing

标题: DAZZLE All kinds of resin Jewelry Casting Dental 405nm Resin Dental Printer 3d Resin 3d Printer Resin [打印本页]

作者: Dazzle 时间: 2024-8-21 19:03
标题: DAZZLE All kinds of resin Jewelry Casting Dental 405nm Resin Dental Printer 3d Resin 3d Printer Resin
本帖最后由 Dazzle 于 2024-8-21 19:20 编辑

Products Description

Please note the resin type you need when ordering！！

Dazzle UV Curing Resin for LCD 3D Printer

Dazz 3D L120 printer comes with high quality liquid resins that are very affordable. We created 15 types of high-precision resins for Dazz 3D users. Our resin is produced using raw materials imported from France, non-toxic, no formaldehyde, no peculiar smell, no dust and other pollution

EC08
Castable•HighWax Resin for jewelryDark GreenViscosity(25℃, cP): 30-60

Tensile Strength at Break(MPa): 10-15

Elongation at Failure(%): 10-18

Glass Transition (Tg,℃): 42

Shore Hardness: 60D

Shrinkage of Vol. (%): 1.18-2.04

HT3
High-temp Resin for jewelrySaffron YellowViscosity(25℃, cP): 600-800
Tensile Strength at Break(MPa): 50-55
Elongation at Failure(%):3-6
Glass Transition (Tg,℃): 180
Shore Hardness: 90D
Shrinkage of Vol. (%): 1.02-1.69

EC18
Castable•LowWax Resin for dentalPurple TransparentViscosity(25℃, cP): 50-80
Tensile Strength at Break(MPa): 20-30
Elongation at Failure(%):5-10
Glass Transition (Tg,℃): 50
Shore Hardness: 78D
Shrinkage of Vol. (%): 1.47-2.07

IC02
Castable Resin Green Viscosity(25℃, cP): 40-47
Tensile Strength at Break(MPa): 18-28
Elongation at Failure(%):5-10
Glass Transition (Tg,℃): 46
Shore Hardness: 70D
Shrinkage of Vol. (%): 2.37-2.88

F20
Smoothness ResinKhaki Viscosity(25℃, cP): 800-900
Tensile Strength at Break(MPa): 40-49
Elongation at Failure(%):13-26
Glass Transition (Tg,℃): 45
Shore Hardness: 82D
Shrinkage of Vol. (%): 2.56-3.25

WG5
Rigid Resin GrayViscosity(25℃, cP): 150-200
Tensile Strength at Break(MPa): 36-52
Elongation at Failure(%):11-20
Glass Transition (Tg,℃): 100
Shore Hardness: 84D
Shrinkage of Vol. (%): 1.32-1.65

SG15
Clear ResinClearViscosity(25℃, cP): 200-300
Tensile Strength at Break(MPa): 35-50
Elongation at Failure(%): 6-10
Glass Transition (Tg,℃): 60
Shore Hardness: 80D
Shrinkage of Vol. (%): 4.76-5.75

WT06
Smoothness
Resin White
Viscosity(25℃, cP): 350-550
Tensile Strength at Break(MPa): 32-37
Elongation at Failure(%): 4-7
Glass Transition (Tg,℃): 65
Shore Hardness: 80D
Shrinkage of Vol. (%): 3.65-3.85

TD02
Temporary Crown Resin for OrthodonticTooth like colorViscosity(25℃, cP): 600-800
Tensile Strength at Break(MPa): 35-50
Elongation at Failure(%): 5-10
Glass Transition (Tg,℃): 116
Shore Hardness: 80D
Shrinkage of Vol. (%): 1.13-2.03

HT7
High-temp Resin for dentalSaffron YellowViscosity(25℃, cP): 700-900
Tensile Strength at Break(MPa): 38-50
Elongation at Failure(%):5-10
Glass Transition (Tg,℃): 120
Shore Hardness: 80D
Shrinkage of Vol. (%): 1.01-1.56

DM07
Orthodontic Dental Model ResinKhahiViscosity(25℃, cP): 700-900
Tensile Strength at Break(MPa): 30-50
Elongation at Failure(%):4-8
Glass Transition (Tg,℃): 115
Shore Hardness: 82D
Shrinkage of Vol. (%): 3.98-4.48

W12
Water Cleanable ResinKhahi
Viscosity(25℃, cP): 200-300
Tensile Strength at Break(MPa): 25-35
Elongation at Failure(%): 5-10
Glass Transition (Tg,℃): 53
Shore Hardness: 72D
Shrinkage of Vol. (%): 1.74-2.08

LC09
Standard ResinGreen Viscosity(25℃, cP): 350-550
Tensile Strength at Break(MPa): 32-37
Elongation at Failure(%): 4-7
Glass Transition (Tg,℃): 65
Shore Hardness: 80D
Shrinkage of Vol. (%): 4.43-4.98

SG03
Biocompatible Resin for Surgery Guide Yellow Clear

Viscosity(25℃, cP): 1600-2000
Tensile Strength at Break(MPa): 44-55
Elongation at Failure(%): 5-10
Glass Transition (Tg,℃): 150
Shore Hardness: 85D
Shrinkage of Vol. (%): 3.20-3.59

R1 Tough Resin
Brown
Viscosity(25℃, cP): 800-1000
Tensile Strength at Break(MPa): 28-37
Elongation at Failure(%): 40-50
Glass Transition (Tg,℃): 65
Shore Hardness: 76D
Shrinkage of Vol. (%): 5.64-5.87

Resin	Feature	Advantages
HT3	High-temp	High temperature: withstands heat deflection temperature (HDT) of 180 C and is widely used in hot and cold molding for environmental testing, production processes and dental practices.
EC08	Castable/highwax	Jewelry design: known as castable wax resin, this resin offers smooth stereolithography surfaces and is recommended to use in jewelry making for custom try-ons and direct investment.
F20	Smoothness	3D sculpting: prints smoothly and precisely, best for use in portrait and prototype applications.
WG5	Rigid	Rigid: features high resistance to deformation, high rigidity and polished finish. Performs well in printing prototypes, portraits, and dentistry models.
W1	Water Cleanable	Nasty free: save the cost for alcohol purchasing, and get rid of nasty feelings since it is water cleanable and safer for kids to use.
R1	Tough	Tough high toughness: suitable for high toughness requirements.
LCO9	Standard	Unbeatable price: create models with outstanding performance and excellent details without sacrificing the strength.

For more information, please visit: http://www.dazz-3d.com/
Contact:
Email: dazz@dazz-3d.com
Phone: +86 18520814727

欢迎光临 All Voice of China 3D Printing (https://panda3dp.com/)