All Voice of China 3D Printing

标题: Creality K3 Opens JD.com Preorders at RMB 4,599 with KliTek Multi-Nozzle Switching [打印本页]

作者: admin 时间: 2026-10-12 17:13
标题: Creality K3 Opens JD.com Preorders at RMB 4,599 with KliTek Multi-Nozzle Switching
Nanjixiong introduction
While multicolor, multi-material 3D printing has traditionally been associated with high-end industrial equipment, Creality is bringing it to a desktop price of RMB 4,599. KliTek multi-nozzle switching promises nozzle changes in five seconds, color changes in 15 seconds and almost no waste. It could represent a significant step from single-color to multicolor consumer 3D printing.

On October 8, 2026, Nanjixiong learned that Creality's new K3 3D printer had officially opened for preorders on JD.com, with a launch price of RMB 4,599 and further discounts available through a benefits package. The K3 uses Creality's internally developed KliTek multi-nozzle switching technology for integrated multicolor and multi-material printing, marking the technology's first implementation in a consumer desktop printer.

(, 下载次数: 0)

Creality K3 3D printer, launching on JD.com at RMB 4,599.

KliTek: nozzle changes in five seconds, color changes in 15 seconds

KliTek is the K3's core selling point. Conventional multicolor printing uses either multiple extrusion heads, which can be bulky and compromise precision, or tool-changing systems, which are expensive and slow to switch. Creality takes a third approach: replacing only the nozzle module rather than the entire toolhead.

(, 下载次数: 0)

Specifications:
• Nozzle switching time: Under five seconds.
• Color/material switching time: Under 15 seconds.
• Repeatable positioning accuracy: Better than 25 μm, using an XYZ positioning system.
• Nozzle module weight: One-fifth of a complete toolhead.
• Replacement: Remove two screws and unplug the USB-C cable.
• Maintenance cost: Described as approximately 4.5 times lower than conventional tool-changing systems; a KliTek nozzle module costs about $14, versus about $67 for a conventional toolhead.

The approach minimizes the size, weight and cost of the part that needs frequent replacement. The nozzle module contains only the nozzle, heater block and part of the filament path. Its lighter weight enables faster switching.

Coordinated nozzle sizes: 0.4 mm for detail, 0.8 mm for infill

Another K3 feature is printing with coordinated nozzle diameters. Different nozzle sizes can be used on the same machine:
• A 0.4 mm nozzle prints outer walls to preserve detail.
• A 0.8 mm nozzle speeds up internal infill.

(, 下载次数: 0)

Parameters are optimized automatically in Creality Print, without manual adjustment. A model's outer walls can therefore use the smaller nozzle for surface quality, while infill uses the larger nozzle for speed, with automatic switching between them.

The K3 also explores full-color mixing. This approach avoids stocking large numbers of filament colors by using only cyan, magenta, yellow and white. Different material stacking ratios and layer thicknesses exploit the materials' light transmission properties for physical color mixing, producing richer colors without hand-painting after printing.

(, 下载次数: 0)

KliTek multi-nozzle switching supports integrated multicolor and multi-material printing.

Optimized TPU printing

Creality has also optimized the K3 for flexible TPU. Its S-Drive dual-drive extrusion system provides more stable feeding of flexible filament. With the TPU kit and a high-flow nozzle, the K3 supports TPU with Shore hardness ratings including 85A, 90A and 95A.

(, 下载次数: 0)

Nanjixiong's observation

At RMB 4,599, multicolor, multi-material printing enters the mainstream consumer price range. Technology still needs time to mature after launch: nozzle switching reliability, multicolor accuracy and filament compatibility require verification through actual use. The next growth opportunity for 3D printing lies in richer colors and materials, rather than speed alone.

A preorder deposit of RMB 18.8 currently provides a launch benefits package valued at RMB 899.

(, 下载次数: 0)

AI-translated from an article by Kuaixiong on Nanjixiong, originally published on 2026-10-08. Text and images retain the original source attribution.
Read the original Chinese article

欢迎光临 All Voice of China 3D Printing (https://panda3dp.com/)