标题: Metal 3D Printing Powder Maker Amaero Lists on Nasdaq, Raising $15.7 Million Net in IPO [打印本页] 作者: admin 时间: 2026-10-16 20:16 标题: Metal 3D Printing Powder Maker Amaero Lists on Nasdaq, Raising $15.7 Million Net in IPO On October 16, 2026, Nanjixiong learned that metal 3D printing powder producer Amaero Inc. had listed on the Nasdaq Capital Market. It issued 4.7 million shares at $4.25 per share, raising $20 million gross and approximately $15.7 million net after underwriting fees. Its ticker symbol is AMRO.
(, 下载次数: 4)
上传
点击文件名下载附件
Headquartered in Tennessee, United States, Amaero produces spherical titanium powders and refractory alloy powders including niobium, tungsten, tantalum and molybdenum. It also manufactures large near-net-shape parts using powder metallurgy and hot isostatic pressing. The company currently operates three gas atomization units with annual capacity of 680 tonnes. A fourth is expected to enter operation in June 2027, increasing capacity to approximately 920 tonnes.
Financially, Amaero's revenue rose from $1.3 million in fiscal 2024 to $6.3 million in fiscal 2025, reaching $7.4 million in the first half of 2026. Losses have widened at the same time: net loss in the first half of 2026 was $13.4 million, and accumulated losses reached $75.5 million. Cash at the end of September was only approximately $4.95 million. The company acknowledged that its post-IPO funding would sustain operations only until the second quarter of 2027, with further financing still required. Its order backlog increased from $400,000 at the end of 2024 to $13.4 million currently. Customers include Velo3D, ADDMAN Group and Titomic.
Nanjixiong observation
Amaero is another metal powder company choosing to list in the United States. Revenue is growing rapidly, but losses are even larger, and its cash runway is less than a year. The listing is more about sustaining operations than entering a harvest phase. Balancing capacity expansion with profitability remains a common challenge across the metal powder sector.
AI-translated from an article by Kuaixiong on Nanjixiong, originally published on 2026-10-16. Text and images retain the original source attribution. Read the original Chinese article
欢迎光临 All Voice of China 3D Printing (https://panda3dp.com/)