标题: UnionTech Cuts Multi-Laser Metal 3D Printing Calibration from Hours to 15 Minutes [打印本页] 作者: admin 时间: 2026-11-16 20:04 标题: UnionTech Cuts Multi-Laser Metal 3D Printing Calibration from Hours to 15 Minutes Introduction: As metal 3D printing moves toward more lasers and larger build areas, galvanometer calibration and stitching accuracy directly affect part quality. Adding lasers makes calibration more complex. Conventional calibration is a hidden bottleneck in continuous production: it makes no parts, but determines machine availability.
How can this time-consuming manual task become fast, precise and automated?
On November 15, 2026, Nanjixiong learned that UnionTech had developed automatic calibration and stitching for its four-laser Fuees430 shoe-mold printer. The company reduced calibration time from four to six hours to 15 minutes, improving efficiency by more than twentyfold at the upper end. Automatic stitching improves productivity and build accuracy.
(, 下载次数: 0)
上传
点击文件名下载附件
Three limitations of conventional calibration
UnionTech's research found that operators had to place photographic paper in the focal plane, print a test pattern with each laser, analyze the patterns with a scanner and manually enter the correction parameters into the RTC5 galvanometer controller. Three limitations became apparent in production.
Long downtime
A full calibration and stitching cycle often took four to six hours of downtime, slowing production.
(, 下载次数: 0)
上传
点击文件名下载附件
(, 下载次数: 0)
上传
点击文件名下载附件
Dependence on operator experience
Operators had to check gaps between overlapping fields, such as those of lasers 2 and 3, under a microscope and manually enter translation offsets. This introduced opportunities for error.
Limited stitching and coverage gaps
The conventional method could not stitch all four lasers. As machine configurations grow to nine or sixteen beams, the workload of aligning each field grows exponentially and becomes impractical.
One-click automatic calibration and stitching
UnionTech's solution automates repetitive error measurement so results can be reproduced and traced.
(, 下载次数: 0)
上传
点击文件名下载附件
High-precision automated data acquisition works with UnionTech's algorithms to replace photographic paper, manual scanning and microscope inspection. At the push of a button, the system measures full-field galvanometer error, generates compensation parameters and corrects stitching across multiple lasers. The procedure can now be standardized.
(, 下载次数: 0)
上传
点击文件名下载附件
Production benefits Faster calibration
A cycle takes 15 minutes instead of four to six hours, reducing downtime and improving overall equipment effectiveness (OEE).
(, 下载次数: 0)
上传
点击文件名下载附件
Greater precision and consistency
Removing manual microscope readings and data entry reduces error. Consistent overlap across all four lasers improves fine details and dimensional accuracy across shoe-mold sizes.
(, 下载次数: 0)
上传
点击文件名下载附件
More time for production and process improvement
In shoe-mold manufacturing, styles change quickly and equipment needs frequent maintenance and changeovers. Each stoppage poses a delivery risk. With 15-minute automatic calibration, equipment can return to production sooner and technicians can focus on higher-value work such as process optimization.
(, 下载次数: 0)
上传
点击文件名下载附件
UnionTech has deployed the technology on the four-laser Fuees430. It plans to adapt it to systems with more lasers and larger build areas to support more stable and efficient mass production. UnionTech invites customers to join it in advancing intelligent manufacturing.
AI-translated from an article by Xiaoruanxiong on Nanjixiong, originally published on 2026-11-16. Text and images retain the original source attribution. Read the original Chinese article
欢迎光临 All Voice of China 3D Printing (https://panda3dp.com/)