标题: VMP to Showcase Alloy Powders Spanning 600°C to 1,000°C at Formnext 2026 [打印本页] 作者: admin 时间: 2026-11-16 20:06 标题: VMP to Showcase Alloy Powders Spanning 600°C to 1,000°C at Formnext 2026 Formnext runs November 17–20, 2026, at Messe Frankfurt in Germany. Nanjixiong learned that Chinese metal powder producer VMP will exhibit in Hall 11.0 at booth D51.
Along with powder and 3D printed samples, VMP will feature three main product families: superalloys, titanium alloys and copper alloys. They cover aerospace, medical applications, thermal management, embodied robotics and consumer electronics.
(, 下载次数: 0)
上传
点击文件名下载附件
Superalloys for temperatures from 600°C to 1,000°C
Higher thrust-to-weight ratios and harsher operating conditions mean aerospace hot-section components need greater resistance to heat, oxidation and thermal fatigue. VMP groups its alloys into five temperature classes:
• 600°C (GH4169, CoCrMo): Mid-temperature high-strength materials balancing strength and fatigue performance.
• 700°C (GH4169D): Designed for higher temperatures and loads.
• 800°C (GH3625, GH3536): Solid-solution-strengthened alloys for high-temperature oxidation environments and complex hot-section components.
• 900°C (GH3230, GH4099): Thermal-shock and oxidation resistance for steep temperature cycles.
• 1,000°C (GH5188): High-temperature strength and oxidation resistance for hot-section environments approaching 1,000°C, including engine afterburners.
(, 下载次数: 0)
上传
点击文件名下载附件
(, 下载次数: 0)
上传
点击文件名下载附件
Titanium alloys for advanced equipment, consumer products and medicine
Titanium alloys are reaching beyond aerospace into advanced equipment and consumer markets. VMP's powder families cover distinct service conditions.
For engine hot sections, load-bearing airframes and demanding applications including the nuclear industry, VMP offers T70X (near-alpha alloy for stable service at 700°C), TC18 (near-beta alloy combining very high strength and good workability), TA15 (near-alpha alloy retaining strength at medium to high temperatures), Ti31 (noted for corrosion and hydrogen embrittlement resistance) and TB8 (high strength for weight-critical parts).
(, 下载次数: 0)
上传
点击文件名下载附件
For consumer and medical applications, its fine MIM-TC4 powder is a high-purity, low-oxygen material for metal injection molding of precision parts for phones, watches and AI glasses. It also offers biocompatible TA1 (commercially pure titanium) and TC4 (alpha-beta titanium alloy), used in medical implants and sports wearables.
Copper alloys for AI computing and liquid cooling
Growing AI computing demand is shifting thermal management from traditional power electronics toward high-heat-flux applications such as server liquid cooling and chip packaging. VMP will show the following products:
(, 下载次数: 0)
上传
点击文件名下载附件
• 3D-Cu (pure copper): ≥99.95% purity and ≤200 ppm oxygen. Printed parts offer thermal conductivity ≥420 W/(m·K) and electrical conductivity ≥95% IACS, for heat sinks with complex passages and liquid cooling plates.
• CuCrZr (high-strength, high-conductivity copper): ≥490 MPa tensile strength and ≥340 W/(m·K) thermal conductivity. Combines conductivity with strength at high temperatures for aerospace combustors and nuclear reactor hot-section components.
• PT-Cu (spray copper): Optimized for cold spray, for conductive coatings and dimensional repairs.
• JL-Cu (copper for conductive pastes): For electronic interconnects, advanced packaging and photovoltaics.
(, 下载次数: 0)
上传
点击文件名下载附件
(, 下载次数: 0)
上传
点击文件名下载附件
Aluminum alloys and alloy steels will also be on display.
Smart manufacturing for batch consistency and traceability
Material performance and consistent quality depend on production controls.
(, 下载次数: 0)
上传
点击文件名下载附件
VMP reports more than 40 operating metal powder lines and more than 20 under construction. It says 100% of its advanced smart equipment and key components are developed in-house, and it has process data from more than 100,000 heats. Its operational third-phase project and fourth-phase industrial park, built to lights-out manufacturing standards, link data and trace batches from raw materials through production, inspection, warehousing and delivery.
(, 下载次数: 0)
上传
点击文件名下载附件
The system supports consistent batch quality, traceability and stable supply. VMP says it maintains credentials covering ISO 9001, AS9100D for aerospace, IATF 16949 for automotive, ISO 13485 for medical devices and FDA requirements.
(, 下载次数: 0)
上传
点击文件名下载附件
From domestic substitutes to application-specific powders
Chinese powder producers have grown by providing domestic alternatives. VMP's Formnext lineup points toward materials developed around specific applications.
Its five superalloy temperature classes and high-conductivity 3D-Cu and CuCrZr for AI liquid cooling illustrate how producers can tailor materials to requirements in engine hot sections, liquid cooling modules and consumer electronics. More than 40 production lines and data from more than 100,000 heats support VMP's efforts to serve high-end global supply chains. Formnext highlights how manufacturing capabilities and responsive materials development are helping Chinese suppliers enter advanced manufacturing supply chains.
AI-translated from an article by Xiaoruanxiong on Nanjixiong, originally published on 2026-11-16. Text and images retain the original source attribution. Read the original Chinese article
欢迎光临 All Voice of China 3D Printing (https://panda3dp.com/)