All Voice of China 3D Printing

标题: Eplus3D Launches EP-M550L with Up to 16 Lasers in a 550 mm Build Area [打印本页]

作者: admin    时间: 2026-11-16 20:07
标题: Eplus3D Launches EP-M550L with Up to 16 Lasers in a 550 mm Build Area
Introduction: As metal 3D printers get larger, laser density per unit area often falls, limiting throughput. For parts around 550 mm, manufacturers need both sufficient space and high throughput, placing demands on optics and production line coordination.

On November 16, 2026, Nanjixiong learned that Eplus3D had launched the EP-M550L automated metal 3D printer. It builds on the M300L automation architecture, scales the build cylinder from the 300 mm class to the 550 mm class and adds up to 16 lasers in the standard area.

(, 下载次数: 0)

More than four times the M300L build volume
The M300L's build envelope is 300 × 300 × 450 mm. The M550L expands this to 550 × 550 × 600 mm including the build plate, with over 180 L per cylinder, more than 4.4 times the M300L's approximately 40.5 L.

(, 下载次数: 0)

The build area fits one-piece consumer electronics frames, mold inserts and small to medium aerospace structures without diluting laser density. Eplus3D lists 8-, 9-, 12- and 16-laser configurations with 500 W, 700 W and 1,000 W options. Theoretical throughput reaches 560 cm³/h.

(, 下载次数: 0)

All 16 lasers fit within the standard 550 × 550 mm area. Higher density increases material melted per unit time without requiring additional floor space, bringing batch cycle times for medium and large parts closer to those for smaller machines.

(, 下载次数: 0)

Precision across 16 overlapping laser fields
With more lasers, quality consistency at field boundaries becomes critical. Automated stitching calibration and an intelligent zone scheduling algorithm aim to keep processing consistent in both single-laser and overlap regions.

(, 下载次数: 1)

The M550L supports 80–120 μm layers to reduce build times. Eplus3D has also optimized thermal conditions, airflow and fume control for extended operation to reduce variation caused by heat buildup and fumes under heavy loads.

Automation across the production line
The M550L extends the automation introduced with the M300L by making high-density printing part of a continuous workflow.

Eplus3D calls it a Production-Ready Automation Line. Modular removable build cylinders separate printing from powder recovery. A completed cylinder transfers out quickly, so the next build can start while powder is removed. Modules handle powder extraction, screening, return and transport. Integration with automated guided vehicles (AGVs) and manufacturing execution systems (MES) gives visibility into cycle times and supports end-to-end traceability.

(, 下载次数: 0)

The M300L had already demonstrated lights-out production concepts: one operator overseeing multiple lines, closed-loop powder handling, melt pool monitoring and digital build records. The M550L scales these features for consumer electronics, tooling, aerospace and energy equipment, where batch consistency and unit costs both matter.

(, 下载次数: 0)

The emphasis shifts from size to laser density
Competition has focused on maximum build dimensions. At the 550 mm scale, buyers also need acceptable cycle times and costs.

The 16-laser design aims to achieve throughput comparable to smaller machines while retaining the structural benefits of large, one-piece builds. Continuous movement through the automated line further increases machine utilization.

The M300L demonstrated modular automation for small and medium parts. The M550L brings it to larger parts with higher production demands. Public information also points to planned M400 and M650 automated models as Eplus3D expands from stand-alone machine productivity to production-line throughput.

AI-translated from an article by Xiaoruanxiong on Nanjixiong, originally published on 2026-11-16. Text and images retain the original source attribution.
Read the original Chinese article




欢迎光临 All Voice of China 3D Printing (https://panda3dp.com/) Powered by Discuz! X3.5