标题: 14 Desktop Color 3D Printers Compared: HeyGears, Flashforge, SIMBA3D, FA3D and More [打印本页] 作者: admin 时间: 2026-11-16 20:08 标题: 14 Desktop Color 3D Printers Compared: HeyGears, Flashforge, SIMBA3D, FA3D and More Nanjixiong introduction: Full-color 3D printers once routinely cost hundreds of thousands or even more than a million yuan, putting them mostly within reach of design studios and industrial buyers. Since the start of 2026, Chinese manufacturers have been bringing full-color systems to the desktop, with some prices dropping into the RMB 20,000–30,000 range. Even printers costing a few thousand yuan can now print in multiple colors.
On November 16, 2026, Nanjixiong reviewed the available information and identified three approaches to desktop and small-studio color 3D printing:
• Material jetting or inkjet resin printing deposits and cures CMYK colorants layer by layer. Color is built into the part, allowing voxel-level gradients.
• FDM prints the object first, and a UV printhead colors the outer shell.
• Multicolor FDM uses multiple filaments or toolheads to separate colors, and layer blending expands the palette.
The approaches produce different color effects and come at different prices. Which desktop color printer is right for you?
(, 下载次数: 0)
上传
点击文件名下载附件
Three ways to print in color
Material jetting systems such as MJP, PolyJet and WJP jet CMYK resins or inks directly onto the build layer and cure them one layer at a time. Overhanging structures and gradients on curved surfaces can be made in one build without manual painting. In hybrid FDM and UV systems, filament forms the structure and UV ink colors only a thin outer layer. Multicolor FDM switches filaments between regions, producing separate color areas where they meet. Layer blending can produce dozens of combinations from a few base colors.
I. Desktop full-color resin and material jetting printers
1. SIMBA3D / inew3d QC2A
SIMBA3D is a brand of Tuoyuan Transmission Technology (Dongguan) Co., Ltd. Its new consumer line is called inew3d, and the QC2A is its desktop full-color photopolymer printer. It made its public debut at Formnext in August 2025 and went on Kickstarter around March 2026, raising about US$1.47 million (more than RMB 10 million). The early-bird price was US$7,199, with shipments beginning in June 2026.
(, 下载次数: 0)
上传
点击文件名下载附件
• Process: Photopolymer Jetting with SimbaSlicer software.
• Build volume: 200 × 160 × 80 mm.
• Layer thickness: 30 μm. Resolution: 720 × 2,880 DPI. Mechanical accuracy: 0.01 mm. Rated print speed: 15 cm³/h.
• Color: Six channels for cyan, magenta, yellow, white and clear resins plus water-soluble support. The manufacturer claims more than 500,000 true colors.
• Features: One-step AI modeling, automatic supports, one-click printing, water-soluble support and 1080p time-lapse monitoring.
2. HeyGears G1X / G1 series
Previously focused on dental and industrial resin printers, HeyGears brought full color to the consumer desktop in 2026. The G1 series raised more than RMB 120 million on Kickstarter from 4,096 backers. Initial deliveries are planned for the fourth quarter of 2026.
(, 下载次数: 0)
上传
点击文件名下载附件
• Process: Material jetting with UV curing. The system can switch between UV resin, UV ink and water-soluble ink.
• Build volume: 330 × 420 × 130 mm in open flatbed mode and 130 × 330 × 150 mm in enclosed flatbed mode.
• Layer thickness: 10–20 μm.
• Color: Eight ink channels. HeyGears claims more than 10 million colors and the ability to print full-color and transparent features together.
• Material compatibility: A claimed 400-plus base materials. Applications also include flat printing, surface texturing on 3D objects and textile transfer films.
• Price: The G1X Full-3D Pack was listed at about US$3,299–3,599 early bird and US$5,499 MSRP by third-party price sites. Consult HeyGears for official pricing.
• Workflow: AI-generated modeling in HeyVerse, slicing in Blueprint Studio, and direct transfer to the printer.
(, 下载次数: 0)
上传
点击文件名下载附件
3. Flashforge CJ270
Flashforge previously developed material jetting expertise with wax. On October 10, 2026, it officially launched the CJ270 desktop full-color 3D printer at RMB 34,999 in China, with international presale pricing around US$3,999. It targets creative studios, designers, customization businesses and educators.
(, 下载次数: 0)
上传
点击文件名下载附件
• Process: Industrial-grade MJP material jetting with seven full-color inkjet printheads.
• Channels: Six base resins (CMYK, white and clear), plus water-soluble support material.
• Build volume: 180 × 120 × 100 mm. Layer thickness: 7 μm.
• Color: A claimed 10 million-plus colors, with gradients, texture mapping and transparent or translucent effects.
• Machine: 697 × 410 × 405 mm, weighing 33.5 kg.
• Workflow: After each layer is jetted, a leveling roller compacts and flattens it to control layer thickness. UV light then cures the layer before the next one is deposited.
(, 下载次数: 0)
上传
点击文件名下载附件
4. Guangzhou Nuocai NC-UV3D
Nuocai has long made UV flatbed, curved-surface and roll-to-roll digital inkjet equipment. It launched the NC-UV3D desktop full-color printer on November 11, 2026, at a listed price of RMB 25,800 on 1688.
(, 下载次数: 0)
上传
点击文件名下载附件
• Process: Digital Material Jetting with an Epson L1440-U2 piezoelectric printhead.
• Build volume: 150 × 200 × 150 mm. Layer thickness: 10–20 μm. Resolution: 360 × 1,080 DPI.
• Channels: CMYK, two white channels and two support channels (W × 2 + S × 2), with dedicated support material.
• Machine: 999 × 526.6 × 723.5 mm, about 55 kg. Enclosed with a viewing window and external touchscreen.
• Applications: Designer toys and cultural products, personalized gifts and keepsake models, architecture and landscape models, decorative objects, product appearance samples and educational models.
(, 下载次数: 0)
上传
点击文件名下载附件
II. Multicolor and layer-blended FDM for dozens of colors
Multicolor FDM generally sells in higher volumes at lower prices. Separate toolheads or filament systems switch materials, and layer stacking or physical mixing can create dozens of combinations from a few base colors. Because colors come from discrete regions and interlayer mixing, these systems cannot reproduce the continuous gradients of inkjet systems. This distinction matters when choosing a machine.
5. Snapmaker U1
The U1 uses SnapSwap, a four-toolhead architecture that switches among toolheads. Snapmaker says it can be expanded to as many as 16 colors. The Kickstarter campaign raised about RMB 150 million, and the printer currently starts at just over RMB 4,000.
(, 下载次数: 0)
上传
点击文件名下载附件
• Build volume: 270 × 270 × 270 mm.
• Process: FDM with CoreXY motion.
• Toolheads: Four standard. SnapSwap™ changes heads in about five seconds. Maximum hot-end flow: 32 mm³/s.
• Nozzle: 0.4 mm stainless steel, for 1.75 mm filament, up to 300°C.
• Print speed: Up to 500 mm/s. Maximum acceleration: 20,000 mm/s².
• Build plate: Textured PEI steel plate, up to 100°C.
• Materials: PLA, PETG, TPU, PVA and PCTG. An optional top cover enables PET, ABS, ASA, PA and PC. A hardened steel nozzle also enables carbon- and glass-fiber-reinforced polymers.
• Machine: 584 × 499 × 730 mm, 18.2 kg, 1,150 W.
(, 下载次数: 0)
上传
点击文件名下载附件
6. Bambu Lab H3C
The third-generation flagship launched on November 3, 2026. Its Swaptek™ rapid toolhead switching system comes with nine independent hardened steel nozzle heads: eight for multimaterial or full-color printing and one dedicated to 2.85 mm extra-soft 75A TPU. Tool changes take about six seconds at the fastest, generating about 38 mg of waste per material change. It supports layer-blended color. Pricing starts at RMB 13,999 after the national subsidy, and it sold out on launch day.
(, 下载次数: 0)
上传
点击文件名下载附件
• Build volume: 330 × 320 × 325 mm.
• Process: FDM with Swaptek™. The AMS 3H holds nine spools. Optional tools include flat-work tools such as cutters and pens.
• Nozzle: 0.4 mm hardened steel, with 0.2, 0.4, 0.6 and 0.8 mm supported. Up to 350°C. Uses 1.75 mm filament, with 2.85 mm supported through the direct feed port. Maximum hot-end flow: 40 mm³/s.
• Toolhead speed: Up to 1,400 mm/s. Maximum acceleration: 25,000 mm/s².
• Bed and chamber: Textured PEI spring steel plate, bed up to 120°C, actively heated chamber up to 65°C, H11 HEPA and activated carbon filtration.
• Materials: PLA, PETG, PCTG, TPU, EVA, PE, PP, PHA, PVA, BVOH and support materials. Chamber heating enables ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS and carbon- and glass-fiber-reinforced filaments. Filament drying is supported.
• Machine: 493 × 571 × 587 mm, net weight 36.28 kg including AMS 3H, maximum power 2,250 W for the 220 V version.
(, 下载次数: 0)
上传
点击文件名下载附件
7. Creality K3
The K3 uses Creality's KliTek™ nozzle switching system with four independent channels and four nozzles. The nozzle assembly switches in about five seconds. Creality says it saves about 80% in printing time and cuts material use by about 85% compared with conventional single-nozzle multicolor systems. It won an IFA 2026 innovation award and was priced at US$849 in presale.
(, 下载次数: 0)
上传
点击文件名下载附件
• Build volume: 260 × 260 × 260 mm. Machine dimensions: 420 × 482 × 536 mm. Net weight: 22 kg.
• Performance: 500 mm/s print speed and 20,000 mm/s² acceleration. Layer thickness: 0.08–0.35 mm with a 0.4 mm nozzle. The machine has 37 sensors and 25 μm repositioning accuracy.
• Color blending: Creality claims 25 colors from four base CMYK filaments by blending across layers. It also notes that the process cannot match colors precisely or reproduce every specified color.
• Nozzles: Standard 0.4 mm, with optional combinations of 0.2, 0.6 and 0.8 mm nozzles. Supports flexible 85A–95A TPU.
(, 下载次数: 0)
上传
点击文件名下载附件
8. Flashforge Creator 5 / 5 Pro
The Creator 5 series uses the FlashSwap architecture with four independent toolheads, each assigned its own filament. Swapping entire toolheads reduces purge tower waste and supports multicolor and multimaterial printing. It is Flashforge's main multicolor FDM offering, priced at RMB 3,000–4,000.
(, 下载次数: 0)
上传
点击文件名下载附件
• Build volume: 256 × 256 × 256 mm.
• Process: FDM with four independent FlashSwap™ toolheads. Whole-head changes reduce purge waste during color and material changes.
• Nozzle: Removable 0.4 mm standard nozzle, with optional 0.25, 0.6 and 0.8 mm sizes. Up to 320°C.
• Maximum extrusion flow: 32 mm³/s. Layer thickness: 0.1–0.4 mm.
• Speed: Travel up to 600 mm/s, printing up to 300 mm/s, and acceleration up to 30,000 mm/s².
• Bed: Flexible textured PEI steel plate, up to 120°C, with automatic leveling.
• Other features: 4-inch 800 × 480 touchscreen, 1,280 × 720 monitoring camera at 30 fps, USB and dual-band 2.4/5 GHz Wi-Fi, and Flash Studio slicer. Filament runout detection, power-loss recovery, automatic toolhead offset calibration, dynamic flow calibration, active vibration compensation and multi-printer management.
(, 下载次数: 0)
上传
点击文件名下载附件
9. Anycubic Kobra X
The Kobra X is an entry-level desktop multicolor FDM printer priced at about RMB 1,300. It supports four colors out of the box and up to 19 with external ACE 2 Pro units. The gantry design and direct-drive extruder target creative models, education and light production.
(, 下载次数: 0)
上传
点击文件名下载附件
• Build volume: 260 × 260 × 260 mm.
• Process: FDM with a gantry and direct-drive extrusion. Native four-color printing expands to 19 colors with up to four ACE 2 Pro units.
• Nozzle: Quick-release hardened steel 0.4 mm, with optional 0.25, 0.6 and 0.8 mm sizes, up to 300°C.
• Print speed: 300 mm/s recommended, up to 600 mm/s. Acceleration: 10,000 mm/s² recommended, up to 20,000 mm/s².
• Bed: PEI spring steel plate, up to 100°C. LeviQ 3.0 auto-leveling with Z offset.
• Materials: PLA, PETG, TPU, PVA, PLA-CF, PETG-CF and ASA. Supports combinations such as PLA with TPU or PVA for flexible and rigid materials or support. Active drying requires an ACE 2 Pro.
• Machine: 455.4 × 445.3 × 461.3 mm, about 9.5 kg. The ACE 2 Pro weighs 3.7 kg.
(, 下载次数: 0)
上传
点击文件名下载附件
10. Zhejiang Feixiong 3D InfiMech MX / MX Pro
The Kickstarter campaign launched on November 13, 2026. The flagship MX Pro has eight independent toolheads, each with its own hot end and filament feed. The printer changes whole toolheads when changing color or material. The MX has six heads, with room to add two later.
(, 下载次数: 0)
上传
点击文件名下载附件
• Build volume: 300 × 300 × 300 mm for the MX Pro and 220 × 220 × 220 mm for the MX.
• Heating and features: Induction heating brings the nozzle up to temperature in about eight seconds. Features include submillimeter positioning repeatability, NFC temperature sensing, blob detection, active AI monitoring, an actively heated chamber, power-loss recovery and automatic bed leveling.
• Material savings: A model with eight colors generates just eight small purge towers throughout the build. The company claims eightfold efficiency and material savings.
• Crowdfunding: The MX Pro attracted 2,885 backers and raised US$2.13 million (about RMB 14.2 million) against a US$51,000 goal. The super early-bird tier sold out. The lowest remaining early-bird price was US$639 (about RMB 4,260).
(, 下载次数: 0)
上传
点击文件名下载附件
11. AXILOOP MC8 / MC8 Pro
The Kickstarter campaign launched on November 12, 2026. Eight independent toolheads preheat on standby and switch colors without a purge tower. AXILOOP is the 3D printing division of Xike Industrial, whose parent is Zesum Technology. It says it has more than 300 patents and lists Corning, BYD and Lens Technology among its partners.
(, 下载次数: 0)
上传
点击文件名下载附件
• Build volume: 300 × 300 × 300 mm. A preheated toolhead can be swapped in as little as four seconds without a wiping or alignment step.
• Performance: 300 mm/s print speed, 600 mm/s extruder travel speed and 25,000 mm/s² acceleration. X-axis linear guide and 2,500-point eddy-current automatic bed leveling.
• Controls: 45 sensors, AI monitoring, remote app control, one-click loading and real-time status feedback.
• Support: Local after-sales service in Germany, France, the United Kingdom and the United States.
12. Creality SPARKX i8
Creality's desktop multicolor FFF printer raised US$5.57 million, around RMB 40 million, on Indiegogo. QuarTeks™ integrates four filament channels into one extruder with a shared nozzle. Color changes take about one second and the shared filament path is less than 1 mm, reducing purging and eliminating the wipe tower. Its open bedslinger design targets entry-level creative printing. Layer blending can also produce multicolored models.
(, 下载次数: 0)
上传
点击文件名下载附件
• Build volume: 260 × 260 × 255 mm.
• Process: Open bedslinger FFF, with a QuarTeks™ four-channel single-toolhead, single-nozzle design for up to four colors.
• Color changes and sensing: Channel changes take less than one second and the shared filament path is less than 1 mm. Thirteen smart sensors in the toolhead and an AI vision camera monitor runout, slippage, printing without extrusion and stringing.
• Nozzle: 0.4 mm, with a five-second quick-release hot end rated up to 300°C.
• Speed: Up to 500 mm/s. Maximum acceleration: 10,000 mm/s².
• Bed: Double-sided gold textured PEI magnetic sheet, up to 100°C, with 81-point automatic leveling and local adjustment.
• Machine: 467 × 423 × 456 mm, net weight 9.72 kg. Power input: 100–120 or 200–240 VAC, 50/60 Hz. Noise: ≤45 dB.
(, 下载次数: 0)
上传
点击文件名下载附件
III. Hybrid printing: FDM with UV surface coloring
13. FA3D DIO X (Shenzhen)
FA3D is a Shenzhen startup. The DIO X is a modular desktop printer with two tool carriages. They can be configured with any combination of FDM, UV inkjet, laser, cutting and pen tools. In the process FA3D calls ColorFusion, FDM filament forms the part and infill, then a six-channel UV printhead applies color to a thin outer layer and UV light cures the ink.
(, 下载次数: 0)
上传
点击文件名下载附件
• Build volume: 300 × 300 × 300 mm. Maximum print speed: 800 mm/s. Maximum nozzle temperature: 350°C. Actively heated chamber: 65°C.
• Tool changes: One second. FA3D claims alignment error under 0.25 mm and has separately cited ±25 μm. Final measurements will need to confirm the figures.
• UV color: Six ink channels at 1,440 DPI, with a claimed 10 million-plus colors. The system uses the FDM part as the base color without a white ink undercoat.
• Materials: PLA, PETG, PC, PPA and TPU. An optional conveyor belt unloads prints automatically.
• Pricing (VIP early bird / MSRP): FDM Starter, US$549 / US$899. Full-Color Starter, US$1,399 / US$2,399. Deluxe, US$3,099 / US$4,999.
• Status: In presale as of late September 2026, with a refundable US$50 deposit to lock in early-bird pricing. Kickstarter was planned for October–November.
(, 下载次数: 0)
上传
点击文件名下载附件
IV. Other full-color models
14. Ningbo Baishida
Ningbo startup Baishida develops consumer and professional 3D printers. In 2026 it completed angel and angel-plus rounds led exclusively by GL Ventures and Jingshuihu Ventures, respectively. The funds support volume production and R&D. Its first model uses layered membrane stereolithography (LMS) and is scheduled to launch at Formnext 2026 in Germany.
(, 下载次数: 0)
上传
点击文件名下载附件
• Process: Layered membrane stereolithography (LMS). A laser cures resin, and membrane transfer builds the part layer by layer.
• Materials: Supports high-viscosity resins, allowing material properties to be adjusted. It aims to reduce volatile emissions and develop equipment and materials for home use.
• Team: Founder Zhou Haoliang earned a PhD from Imperial College London and has long researched 3D printing algorithms. Co-founder Li Yiqi has more than ten years of photopolymerization experience. Tang Bojiong previously oversaw R&D and quality in Lenovo's printer business. The company holds three granted invention patents and works on materials with organizations including the Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences.
Nanjixiong's observations
The roundup shows distinct price tiers. Chinese resin jetting printers have reached RMB 20,000–50,000. The QC2A early-bird price was around US$7,199 and the G1X reached the US$3,000 range on Kickstarter. FA3D combines FDM with UV surface coloring to offer a full-color VIP package at US$1,399. Multicolor FDM spans roughly RMB 1,000 to RMB 14,000, and some crowdfunded eight-head printers cost less than RMB 5,000 at early-bird prices.
Resin jetting offers the broadest color capabilities, including gradients on curved surfaces and integrated transparent features that are hard to duplicate with FDM. Hybrid FDM and UV costs less and produces sturdier parts, but colors only a thin exterior layer. Multi-toolhead FDM offers advantages in price, material compatibility and speed. Layer blending can produce dozens of combinations within the limits of the base colors and how they mix physically.
These desktop models are mainly used for designer toys and figures, portraits, display models and appearance prototypes. Readers can choose according to their needs and budgets.
Please share any models we missed.
AI-translated from an article by Xiaoruanxiong on Nanjixiong, originally published on 2026-11-16. Text and images retain the original source attribution. Read the original Chinese article
欢迎光临 All Voice of China 3D Printing (https://panda3dp.com/)