All Voice of China 3D Printing

标题: TPM3D CF250 and PPS250 Debut at Formnext: 0.53 m² Footprint and Up to 133% More Output [打印本页]

作者: admin    时间: 2026-11-18 20:01
标题: TPM3D CF250 and PPS250 Debut at Formnext: 0.53 m² Footprint and Up to 133% More Output
Nanjixiong introduction: Formnext 2026 opened on November 17 in Germany, marking the international debut of TPM3D's compact professional SLS system, the CF250 with PPS250. Research teams, service providers and smaller manufacturers have faced large equipment footprints and laborious, dusty powder handling. The combination addresses these issues with a small footprint, higher output and automated powder management.

(, 下载次数: 0)

More output from a small footprint
Space efficiency affects the return on investment in laboratories and small workshops. The CF250 occupies just 0.53 m² and has a 250 × 250 × 320 mm build cylinder. Compared with the CF200, its footprint increases by about 20%, while capacity increases 67% and output per build increases by up to 133%.

(, 下载次数: 1)

Users can arrange larger parts and more parts in the available space. For small-batch customization, prototypes and fixtures, higher output per unit of floor space lowers allocated costs per part.

Hardware and software simplify operation
The software guides users through model preparation, nesting and parameter settings. A straightforward machine interface simplifies the process from job preparation to starting a print.

(, 下载次数: 0)

This helps professional SLS fit into routine development and production.

(, 下载次数: 0)

Automating powder handling
SLS requires more than printing. Depowdering parts, sieving residual powder, mixing fresh and used material and feeding the next build can consume considerable labor and create dust.

(, 下载次数: 0)

The PPS250 integrates automatic depowdering, sieving, mixing and piped powder feeding, connecting operations that otherwise require manual handling. Negative-pressure dust collection and filtration reduce powder escape and keep the workplace cleaner.

(, 下载次数: 0)

The CF250 and PPS250 provide a connected workflow from model preparation and printing through powder recovery and reuse, reducing manual intervention.

(, 下载次数: 0)

Automation helps make SLS accessible
TPM3D has more than twenty years of SLS experience, with earlier products mainly serving large industrial operations. The compact CF250 and automated PPS250 extend its offering to smaller R&D teams and professional service providers.

Beyond equipment prices, limited space and a shortage of skilled operators constrain adoption. Higher output in a smaller footprint addresses space, while automated powder handling reduces dependence on manual experience.

When fewer operators are needed for powder cleaning and nesting, and a single machine produces meaningful output, small-scale SLS production becomes more economical. The Frankfurt debut could help TPM3D reach smaller professional customers internationally.

AI-translated from an article by Xiaoruanxiong on Nanjixiong, originally published on 2026-11-18. Text and images retain the original source attribution.
Read the original Chinese article




欢迎光临 All Voice of China 3D Printing (https://panda3dp.com/) Powered by Discuz! X3.5