All Voice of China 3D Printing

标题: iPCON at Formnext: Support Materials Bring Engineering Filaments to Open Desktop Printers [打印本页]

作者: admin    时间: 2026-11-18 20:04
标题: iPCON at Formnext: Support Materials Bring Engineering Filaments to Open Desktop Printers
On November 17, 2026, Nanjixiong visited iPCON at Formnext in Germany and saw engineering material samples printed on Bambu Lab A1 machines. These open desktop systems produced supported engineering parts that often require enclosed equipment.

Easy-to-remove support material
The booth's main highlight was a general engineering support material. Staff said it works with nylons, ABS, ASA, PET, PC, PPA and PPS. It produces smooth support interfaces and peels off in one piece with light pressure. Large flat examples printed since that morning could be stripped directly.

(, 下载次数: 0)

The support simplifies dimensional accuracy and removal for desktop users. Staff also reported good speed and dimensions for PPS-CF with the support on Bambu Lab H2S systems.

Engineering materials from PA6 to PPS
Base materials included PA6, ASA, PC and PET, along with reinforced grades.

(, 下载次数: 0)

• CoPA HS combines self-lubricating properties associated with PA6 and PA66. After moisture uptake, nylon becomes softer and tougher, useful for mudguards and model-car suspension needing both stiffness and impact resilience.
• ASA offers weather resistance for outdoor use.
• PC-CF and PC-GF retain strength and stiffness after moisture uptake. PC also resists creep better than PA6 grades.
• PET-CF targets accessible pricing and printability while retaining strong mechanical performance.
• PPS-CF, PPS-GF, PPA-CF, PPA-GF and unfilled PPA cover specialty engineering applications.

Staff emphasized PPS's chemical resistance and heat deflection temperature above 260°C after annealing under a 0.45 MPa load. PPA-CF is among the company's strongest and stiffest desktop-printable materials.

Specialty consumer filaments

(, 下载次数: 0)

• Matte PLA has fine surfaces and colors inspired by traditional Chinese palettes. PLA-CF is offered in several dyed colors.
• FC is a food-contact grade. Metallic PETG-CF includes black and a bronze-gold tone for historical and collectible objects.
• PP-CF and PP-GF retain PP toughness and flex resistance, with strong layers and tear-resistant thin walls. Glass fibers produce an orange-peel texture. PP's low density suits lightweight model aircraft.
• TPU-CF 70D combines structural stiffness and flexibility with impact resistance for drone protection. The softer TPU 95A HS is more wear-resistant and suits tires.
• PC-FR HS is flame-retardant, fast-printing PC that can be used on open machines. Its translucent appearance suits lamps requiring heat and flame resistance, properties conventional clear PETG does not offer to the same degree.

Customer applications
• Automotive intake manifold: PA6-GF, installed in a vehicle. Staff reported approximately 120°C continuous-use temperature in automotive conditions, with thick walls providing strength and load capacity.

(, 下载次数: 0)

• Bow-and-arrow equipment: PPA-CF for high specific strength and stiffness. PPS-CF samples made on an H2S serve aerospace applications.

(, 下载次数: 0)

• Motorcycle mudguards: Customers have printed batches in multiple materials and delivered them installed on vehicles.

(, 下载次数: 0)

• Drone parts use TPU-CF 70D, and lamps use PC-FR HS.

Nanjixiong's observations
iPCON differentiates materials around uses: self-lubricating nylon, reinforced PP, stiff TPU and translucent flame-retardant PC for mudguards, model aircraft, drones and lighting. Selecting by application helps desktop users choose, while narrower use cases demand deeper formulation experience and consistent supply.

AI-translated from an article by Kuaixiong on Nanjixiong, originally published on 2026-11-18. Text and images retain the original source attribution.
Read the original Chinese article




欢迎光临 All Voice of China 3D Printing (https://panda3dp.com/) Powered by Discuz! X3.5