3Dprinting-Standard Resin
本帖最后由 Titan 于 2024-8-12 15:13 编辑Standard Resin
Performance
1.High Precision and Sharpness
2.Low Shrinkage
3.High Hardness
4.Low Viscosity and Odor
5.Good Fluidity
6.Cost Effectiveness
7.No Cracking or Deformation
ColorWhite/Grey/ Red Wax Like/Skin Beige
Temperature25±5 ℃
Humidity40-60 %rh
Post Cure Time5 mins
Wavelength365-405(NM)
Bottom Curing Time40-60(S)
Curing Time2.5-3.5(S)
Shore Hardness82-86(D)
Viscosity100-150(CPS)
Density1.1(g/c㎥)
Bending Strength72-80(MPA)
Tensile Strength40-50(MPA)
Elongation at Break4-9(%)
页:
[1]