• Panda3DP南极熊
  • News
  • 3DP Manufacturers
  • About

    •  找回密码
     register
    search
    返回列表 发新帖

    3Dprinting-Standard Resin

    author：Titan | date：2024-8-12 14:27 | show all
    本帖最后由 Titan 于 2024-8-12 15:13 编辑


    Standard Resin
    wps_doc_0.jpg


    Performance

    1.High Precision and Sharpness

    wps_doc_1.jpg

    2.Low Shrinkage

    wps_doc_2.jpg


    3.High Hardness

    wps_doc_3.jpg



    4.Low Viscosity and Odor

    wps_doc_4.jpg


    5.Good Fluidity

    wps_doc_5.jpg


    6.Cost Effectiveness

    wps_doc_6.jpg


    7.No Cracking or Deformation


    Color
    White/Grey/ Red Wax Like/Skin Beige
    Temperature
    25±5 ℃
    Humidity
    40-60 %rh
    Post Cure Time
    5 mins
    Wavelength
    365-405(NM)
    Bottom Curing Time
    40-60(S)
    Curing Time
    2.5-3.5(S)
    Shore Hardness
    82-86(D)
    Viscosity
    100-150(CPS)
    Density
    1.1(g/c㎥)
    Bending Strength
    72-80(MPA)
    Tensile Strength
    40-50(MPA)
    Elongation at Break
    4-9(%)
    reply

    magic report

    send post

    Titan

    Follow
    threads 2
    posts 2
    credits 11
    Post Voices for China 3D Printing.
    Read more of author

    Complaints

    top