本帖最后由 JohnJK 于 2024-8-7 17:57 编辑
Zibo Zhumeng Workshop 3D Technology Co., Ltd
Zibo Zhumeng Workshop筑梦工场
Company Profile
Zibo Zhumeng Workshop 3D Technology Co., Ltd. is an enterprise that focuses on 3D printing technology and engages in the development of 3D printing small-batch equipment and software.
Based on additive manufacturing technology, the company has developed an intelligent injection molding small batch molding process system, incorporating image recognition, robotic arm automation, material recycling and other related technologies, which improves material utilization and avoids waste and energy loss. The process system has obtained six related patents and has been widely recognized by peers and upstream and downstream industries.
Adhering to the corporate philosophy of "simultaneous development of production and research, quality first", the 3D Dream Factory is committed to promoting the sustainable development of the 3D printing industry. It is brave in innovation and breakthroughs, achieving a reasonable allocation of talent, technology, and capital elements. It is committed to creating safe, practical, and comfortable high-end products for users, and is always a trusted friend of customers. The company is constantly moving forward along the path of high-tech growth.
Product Introduction One
Zibo Zhumeng Workshop筑梦工场
The system is mainly composed of 3D printing sustainable circulation system, 3D printing small batch injection molding system and robot arm grasping system.
3D printing sustainable circulation system is composed of plastic crusher, desktop extruder and desktop 3D printer. The principle is that after the existing silk consumables are put into the desktop printer for printing and forming, the molds or models that have no use value can be put into the crusher for crushing, and then put into the wire extruder after the formation of fine particles. The wire rods in the printer can be used for extrusion. The whole production process effectively reduces the material waste and realizes the material utilization It can be recycled.
Small batch injection molding system is composed of desktop small injection molding machine, printable high temperature desktop printer or sla3d printer. The principle is to print the appropriate mold to the small injection molding machine through the printer, so as to complete the small batch injection molding of the product.
The specific application method is: the 3D printer prints out the appropriate mold, during the printing process, the scanning detector set on the printer carries out the appearance inspection. When the overall mold printing is detected, the scanning detector sends instructions to the mechanical arm placed outside the printer. The mechanical arm grabs the model on the printer and carries out deep processing and deep processing of the mold model After the completion of the work, the mechanical arm is placed on the desktop injection molding machine of the next process. A pressure switch is set in the fixture of the desktop injection molding machine. When the value of the pressure switch changes, the injection molding machine starts to enter the preheating stage. After the preheating, the injection molding machine starts to carry out small and medium-sized injection molding. After the injection is completed, the product is loaded and unloaded by another mechanical arm. When the product mould is used or scrapped, the product can be crushed by the plastic crusher. After crushing, it is filled into the desktop extruder to extrude qualified materials, and then sent to the printer for printing.
The problems to be solved are:
1. The application of the whole product line reduces the mechanical error in the production process, and ensures the product qualification rate;
2. The dust produced in the grinding process of the product can effectively reduce the harm to people through the mechanical arm;
3. It saves manpower.
Product Introduction Two
Zibo Zhumeng Workshop筑梦工场
One Principle
The system operates by driving a screw with a servo motor. After adding the material, it is plasticized within a hot melt runner. The rotation of the screw forces the material into the mold cavity, where it is extruded into wire. This wire is then guided into a sizing tube and cooled by a fan to form the final product, which can be directly loaded into a 3D printer for printing.
Two Composition
This workstation comprises an extruder, a 3D printer, and an optional accessory package.
Three Features of the Workstation
This workstation is designed to be compact, flexible, and versatile. The optional accessory package includes options for pelletizing and automatic wire coiling, allowing users to pair the extruder with their specific needs. The extruder is equipped with a direct-blow air-cooling fan inside, replacing the traditional water-cooling system, providing a safe and reliable working environment. The mold can be easily exchanged to extrude samples of different shapes, accommodating temporary usage requirements.
Contact: Manager Sun
TEL:0086-15624485421
|
Record number | ©2024 panda3dp Team. Powered by panda3dp
