Upcoming conference | RAAM 2024 registration is open…

The 4th International Conference on Research Advances in Additive Manufacturing (RAAM 2024) will be held on June 28th-30th, 2024 in Nanjing, China.

The RAAM International Conference, initiated by Nanjing University of Science and Technology (NJUST), serves as an extension of the world’s famous conference in the field of additive manufacturing, the Solid Freeform Fabrication Symposium (SFF), which has been held for 34 times. Professor David Bourell from The University of Texas at Austin, Chairman of the SFF International Conference, serves as the Chair of the Scientific Committee. Professor Wenhe Liao, Vice President of NJUST, serves as the Chair of the Organizing Committee. RAAM aims to establish an international academic exchange platform for additive manufacturing technology, prompting global academic dialogue and mutual learning, and leading the international cutting-edge innovation and vigorous development of additive manufacturing technology.

Since its inaugural session in Nanjing in 2019, RAAM has been successfully held three times. Bolstered by the enthusiastic participation and sustained support of experts and scholars worldwide, RAAM is evolving into a highly-regarded international conference in the field of additive manufacturing. The series of RAAM conferences has gathered over a thousand scholars from more than 30 countries, including China, The United States, The United Kingdom, Belgium, Singapore, Australia, Germany, Japan, Netherlands, New Zealand, etc.

Notable attendees include Professor David Bourell, initiator of the U.S. Additive Manufacturing Roadmap; Professor Jean-Pierre Kruth from KU Leuven, a pioneer and founder in laser powder bed fusion technology; Professor Eric MacDonald from The University of Texas at El Paso, Editor-in-Chief of Additive Manufacturing Letters; Professor T. DebRoy from Pennsylvania State University, the founding editor of Science and Technology of Welding and Joining; Professor Chee-Kai Chua from Singapore University of Technology and Design, Editor-in-Chief of Virtual and Physical Prototyping; Professor Christopher Tuck, Faculty Associate Pro-Vice-Chancellor of the University of Nottingham; Dr. Christoph Kiener, the Chief Scientist for 3D Printing from Siemens in Germany; Professor Yimin  Xie from RMIT University, Fellow of Australian Academy of Technological Sciences and Engineering; Professor Yinghong Li from Air Force Engineering University, Academician of the Chinese Academy of Sciences; Professor Huaming Wang from Beihang University, Academician of the Chinese Academy of Engineering; Professor Guoqing Wang from China Aerospace Science and Technology Corporation, Academician of the Chinese Academy of Engineering; Professor Weihong Zhang from Northwestern Polytechnical University, Academician of the Chinese Academy of Sciences; and Professor Lan Jiang from Beijing Institute of Technology, Academician of the Chinese Academy of Sciences.

The RAAM conference is supporting extensive and in-depth discussion on the international research frontiers including the origins and developing trends of additive manufacturing, the innovative design of advanced structures, high-performance material manufacturing, monitoring, simulation and quality control, and industrial applications.

Conference Dates and Venue

June 28th-30th, 2024

Nanjing International Conference Hotel, Nanjing, China

Organization

Host: 

Nanjing University of Science and Technology

Organizer:

National & Local Joint Engineering Laboratory for CNC Forming Technology and Equipment

Co-organizers:

Innovation Center for Additive Manufacturing of Aerospace Structures

National Engineering Research Center for Additive Manufacturing of Polymer Complex Structures

Conference Themes

Structural Innovation Design, Modeling, Simulation, and Software

Materials: Metals, Ceramics, Polymers, Composites

Processes: Powder Bed Fusion, Directed Energy Deposition, Photopolymerization, Hybrid Additive Manufacturing, etc.

Equipment: Online Monitoring, Equipment Development

Industrial Development: Aerospace, Electronics, Marine, and others

Quality Control: Defect Detection, Defect Control, Quality Standardization

Keynote Speakers

Scientific Committee

Chair:
Bourell, David	University of Texas at Austin, USA
Committee Members:
Chua, Chee Kai	Singapore University of Technology and Design, Singapore
Clare, Adam	University of British Columbia, Canada
DebRoy, Tarasankar	Pennsylvania State University, USA
Diegel, Olaf	University of Auckland, New Zealand
Gibson, Ian	University of Twente, Netherlands
Hague, Richard	University of Nottingham, UK
Kiener, Christoph	Siemens, Germany
Leng, Jinsong	Harbin Institute of Technology, China
Leu, Ming	Missouri University of Science and Technology, USA
Li, Yinghong	Air Force Engineering University, China
Liao, Wenhe	Nanjing University of Science and Technology, China
MacDonald, Eric	University of Texas at El Paso, USA
Niino, Toshiki	University of Tokyo, Japan
Rosen, David	Agency for Science, Technology and Research, Singapore
Shi, Yusheng	Huazhong University of Science and Technology, China
Stucker, Brent	Wohlers Associates, USA
Tuck, Christoph	University of Nottingham, UK
Wang, Guoqing	China Aerospace Science and Technology Corporation
Wang, Huaming	Beihang University, China
Xie, Yimin	RMIT University, Australia
Zhang, Weihong	Northwestern Polytechnical University, China

Organizing Committee

Chair:
Liao, Wenhe	Nanjing University of Science and Technology, China
Committee Members:
Chen, Longmiao	Nanjing University of Science and Technology, China
Ding, Guozhi	The Third Academy of China Aerospace Science and Industry Corporation Limited
Du, Yulei	Nanjing University of Science and Technology, China
Gu, Dongdong	Nanjing University of Aeronautics and Astronautics, China
Huang, Jin	Xidian University, China
Lei, Liming	Taihang Laboratory, China
Li, Dawei	Nanjing University of Science and Technology, China
Li, Kun	Chongqing University, China
Li, Ming	Xi’an Institute of Optics and Precision Mechanics of CAS, China
Lin, Xin	Northwestern Polytechnical University, China
Liu, Changmeng	Beijing Institute of Technology, China
Liu, Tingting	Nanjing University of Science and Technology, China
Meng, Liang	Northwestern Polytechnical University, China
Niu, Fangyong	Dalian University of Technology, China
Qi, Junfeng	Beijing Satellite Manufactory Co., Ltd, China
Qian, Yuanhong	The Third Academy of China Aerospace Science and Industry Corporation Limited
Song, Bo	Huazhong University of Science and Technology, China
Su, Haijun	Northwestern Polytechnical University, China
Tang, Ye	The Second Academy of China Aerospace Science and Industry Corporation Limited
Tian, Xiaoyong	Xi’an Jiaotong University, China
Wang, Di	South China University of Technology, China
Wang, Fude	China Academy of Launch Vehicle Technology
Wang, Geng	Nanjing University of Science and Technology, China
Wang, Xiebin	Shandong University, China
Wei, Huiliang	Nanjing University of Science and Technology, China
Wu, Zhilin	Nanjing University of Science and Technology, China
Xiao, Xingzhi	Nanjing University of Science and Technology, China
Xue, Lian	China Productivity Center for Machinery Co., Ltd
Yan, Chunze	Huazhong University of Science and Technology, China
Yang, Daotao	Nanjing University of Science and Technology, China
Yang, Shoufeng	Harbin Engineering University, China
Yuan, Shangqin	Northwestern Polytechnical University, China
Zhao, Jie	Farsoon Technologies, China
Zhao, Kai	Shanghai Aerospace Equipment Manufactory Co., Ltd, China
Zhao, Yufan	Northwestern Polytechnical University, China
Zhang, Changdong	Nanjing University of Science and Technology, China
Zhang, Dongyun	Beijing University of Technology, China
Zhang, Heng	Nanjing University of Science and Technology, China
Zhang, Kai	Nanjing University of Science and Technology, China
Zhang, Lei	Tsinghua University, China
Zhou, Xin	Air Force Engineering University, China
Zhu, Zhiguang	Nanjing University of Science and Technology, China

Best Presentation Award

The conference is calling for presentations for technical sessions, showcasing the recent innovative research findings in the field of additive manufacturing. The best presentation will be selected in each technical session and awarded with a certificate, based on the appraisal from the renowned scholars including the distinguished keynote speakers and chair of the technical sessions.

Conference Schedule

Time	June 28th (Friday）	June 29th (Saturday)	June 30th (Sunday)
08:30 -12:00	Registration	Plenary Session	Parallel Sessions
13:00 -17:00		Plenary Session	Parallel Sessions
18:00 -20:00		Banquet	Dinner Buffet

Registration

Type	Before June 15th	June 16th-25th
Professionals	1600 CNY	1800 CNY
Student	1000 CNY	1200 CNY

For the registration, presentation, and accommodation of RAAM 2024, please scan the QR code below to enter the registration system.

Contact Information

Email: raam@njust.edu.cn
Phone: +86 15951787194
WeChat group: Please contact the organizing committee to join.