Dazzle Dark Green High Wax EC08 Casting UV 3D Resin for Jewelry Castable 3D UV Printer

Product Overview
LCD high wax content castable photosensitive resin EC08 is a solvent-free, low viscosity, high precision photocurable 3D printing resin. Suitable for laser and LED light source. It can be molded under the irradiation of 405nm UV light source. The photosensitive resin mixture formula is optimized and can effectively suppress the beam penetration and avoid deep curing. The minimum layer thickness of single exposure can be controlled at 0.025mm. It could achieve high molding precision with low odor and low irritancy. With high wax content, the model is castable. But please pay attention when post curing because the model could be softer than others .
It can be used to make models in the fields of jewelry, hair accessory, etc. This resin can be used in Dazzle L120 Basic & L120 Pro 3D printer and the same type of LCD 3D printer.

Model	Dazzle (Dazz 3D) Resin EC08
Feature	Castable, High Wax Content
Viscosity (25ºC,cP)	30-60
Specific Gravity(g/cm3)	0.98-1.07
Elongation at Failure(%)	10-18
Glass Transition (Tg,ºC)	42
Shore Hardness	60D
Shrinkage（%）	1.18-2.04
Packing	500g/bottle
Suitable Temperature	18-28 °C
Lifespan	12 Months

Products Description