AmPro Innovations to Showcase the Latest Breakthroughs in the Metal 3D Printing Industry Chain at the 15th Zhuhai Airshow

The 15th China Airshow will take place in Zhuhai from November 12-17. At this event, AmPro Innovations（倍丰智能） will comprehensively exhibit its latest achievements in the metal 3D printing industry chain, showcasing breakthroughs in high-performance metal powders, advanced 3D printing equipment, and innovative printing processes. 

△The 14th Zhuhai Airshow (Note: Pictures are sourced from the Internet)

AmPro Innovations’s High-Performance Metal Powders Debut

In the realm of metal powders, AmPro Innovations is committed to developing high-performance materials, including BF-T1200 high-strength titanium alloy, TC4-A titanium alloy, and GA520 aluminum alloy powders. These powders, produced using AmPro Innovations’s advanced manufacturing technologies, boast exceptional sphericity, high purity, and excellent flowability, making them ideal for crafting high-performance aerospace components. 

-BF-T1200 Titanium Alloy Powder

  Renowned for its exceptional strength at both room and elevated temperatures, fatigue resistance, stress tolerance, and corrosion resistance, BF-T1200 maintains a high purity with oxygen content below 1000ppm. It can operate for 3000 hours in high-temperature environments (~500°C) and has a service life of up to 6000 hours at 450°C. These superior properties make it a preferred material for manufacturing structural components and large integral parts for missiles, rockets, and satellites. 

-TC4-A High-Strength Titanium Alloy Powder

  With a nominal chemical composition of Ti-6Al-4V, this alloy offers high strength-to-weight ratio, corrosion resistance, biocompatibility, and non-magnetic properties. It finds critical applications in aerospace, defense, and biomedical fields. AmPro Innovations’s proprietary GHA technology ensures the production of TC4-A powder with superior sphericity, minimal satellite particles, and outstanding purity and flowability, supporting high-density and high-performance end products. 

-GA520 Aluminum Alloy Powder 

  GA520 is distinguished by its remarkable high-temperature resistance and tensile strength exceeding 520MPa, making it the material of choice for components operating in high-temperature conditions. 

New SP501 Printer & G40 Powder Cleaning System Debut 

-SP501 Metal 3D Printer

  Making its first appearance at the event, the SP501 features a substantial build volume of 500mm x 500mm x 500mm, catering to the production of large, complex metal components. Equipped with a six-laser printing system, it significantly enhances efficiency, particularly for large or multiple-part printing.

The integrated automated powder circulation system supports powder recovery, feeding, and sieving, ensuring uninterrupted production. Additionally, its compatibility with the MES intelligent management system enables real-time production monitoring, data collection, and traceability, underscoring its competitive edge in the aerospace sector. 

△AmPro Innovations Metal 3D Printing Equipment

-G40 Large-Scale Powder Cleaning Equipment 

  Designed to meet the demands of larger workpieces, the G40 accommodates base sizes up to 900mm x 900mm. Its ATEX explosion-proof certification guarantees operational safety, making it an ideal post-processing solution for metal 3D printing. 

Revolutionary 3D Printing Application in Aerospace

One showcased innovation is the use of metal 3D printing to produce aircraft engine oil heat exchangers, a critical component for maintaining optimal engine temperatures. Traditional welding methods, prone to defects, often risk rendering parts unusable. AmPro Innovations’s advanced manufacturing processes enable integrated component formation, reducing production time and enhancing performance. The technology ensures 100% yield rates by virtually eliminating defects, marking a transformative leap in aerospace manufacturing. 

△Aerospace Printing Samples Exhibited by AmPro Innovations at TCT in 2024

Collaboration with Guangdong Huangpu: Advancing the Low-Altitude Economy

In partnership with the Guangdong Huangpu government, AmPro Innovations will highlight advancements in metal 3D printing and the burgeoning low-altitude economy at the Zhuhai Airshow. As a pivotal hub in the Greater Bay Area, Huangpu District is cultivating a vibrant ecosystem for future industries, including low-altitude economy and commercial aerospace. 

AmPro Innovations’s strategic presence in Guangzhou’s Huangpu District leverages local industrial strengths and aims to spearhead innovation in 3D printing. By addressing strategic and market demands, the company aspires to build an internationally renowned innovation hub, advancing high-end equipment manufacturing clusters and fostering a globally competitive 3D printing industry. 

During this Zhuhai Airshow, the joint publicity of AmPro Innovations and the government of Huangpu District has not only manifested the technological prowess and industrial arrangement of both parties within the domain of low - altitude economy, but also underlined the development blueprints and prospective aspirations of Huangpu District in this regard, thus presenting the audience with a novel and highly innovative aerospace industry ecosystem replete with creativity.

AmPro Innovations will continue its dedication to the metal 3D printing field, driving technological innovation and industrial upgrades. By focusing on high-performance metal powder development and expanding into low-altitude and commercial aerospace markets, the company aims to establish a new aerospace ecosystem. Through collaborative efforts with government entities, AmPro Innovations strives to promote intelligent and green manufacturing, forging a sustainable future for the industry.